DiY Your Own Fence with an Easy to Use Fencing System

We all know that hiring a contractor to do anything is not cheap. Unfortunately some jobs require the expertise of a skilled tradesperson or a qualified professional, but not when it comes to fencing!

For years, we’ve had to pay loads to put up a fence. At DiYAS, we’ve created a new and unique Aluminium Slat Fencing Kit System that needs no special skills or experience. It’s that easy!

We’ve put a couple of examples to the test to show how much you can save.

Fencing contractor verses DiY fencing

Scenario #1:  4.0m length of aluminium slat fencing concreted into the ground

This fence will need three posts holes to be dug and the posts set into concrete footings. The posts’ footings need time to dry before the slats can be fixed into place.

How much can you save if you DiY?

Based on two people doing the job -

  1. Clear area for the aluminium slat fence and peg out positions for the aluminium fence posts – 0.5 hour
  2. Dig holes for the 3 aluminium fence posts – 0.5 hour
  3. Set each post in concrete footing x3 aluminium fence posts – 0.75 hour
  4. Allow the concrete footings to set – 1 hour
  5. Install aluminium slats into the aluminium posts, check level and fix the slats to the Fence posts. – 1 hour

Total time = 4 hours (approx)

Cost of contractor = $50 per hour per person x2 people

Total savings if you DiY with DiYAS = $400.

 

Scenario #2: 30.0m length of fencing concreted into the ground

This fence will need 14 posts holes to be dug and the posts set into concrete footings. The posts footings need time to dry before the slats can be fixed into place.

How much can you save if you DiY?

Based on two people doing the job –

  1. Clear area for the aluminium slat fence and peg out positions for the aluminium fence posts – 2 hours
  2. Dig holes for the 14 aluminium fence posts – 2.5 hours
  3. Set each post in concrete footing x14 aluminium fence posts – 3.5 hours
  4. Allow the concrete footings to set – 1 hour
  5. Install aluminium slats into the posts, check level and fix the slats to the fence posts. – 6.5 hours

Total time = 15.5 hours (approx)

Cost of contractor = $50 per hour per person x2 people

Total savings if you DiY with DiYAS = $1,550.

Wait – there’s more! Save more than just cost. Order any time that suits you 24/7 and build the fence when you want!

Our DiYAS Aluminium Slat Fencing System is made simple and easy with the support of real people to guide you through. Download instructions or have a chat about how DiY Aluminium Systems will work for you.